Canada - Engine Controls - DTC P0560 Diagnostic Info.

GROUP
ENGINE ELECTRICAL

NO.
00-36-007

DATE
DECEMBER 20/00

MODEL
XG300

SUBJECT

DIAGNOSTIC TROUBLE CODE P0560

The 2001 XG300 Shop Manual is missing information related to Diagnostic Trouble Code (DTC) P0560.

DTC P0560 indicates that:

^ The back-up power (also referred to as "Memory Power") to the ECM is low.

^ In order for this DTC to be set the voltage at ECM connector C44-2 pin # 26 must be below 2 Volts for at least 10 seconds.

^ Normally the voltage at this pin is battery voltage.

The most likely cause of this DTC is an electrical wiring problem.

The power for this pin comes from the engine compartment junction block from the ECM Fuse (10A) at connector JC01, pin C11. The wire insulation colour is Orange. This is illustrated on page SD-72 of the 2001 XG300 Electrical Troubleshooting Manual.

Please note this TSB number on page FL-22 and FL-24 of the 2001 XG300 Shop Manual for future reference.