Re-Install Both Front Seats

1. Reinstall the seats into position. Lightly tighten the four mounting nuts and bolts.

2. Verify that the seat moves forward and backward without binding. If necessary, loosen all 4 fasteners, move the seat forward and backward a few times, then tighten the fasteners.





3. Tighten the four fasteners to the appropriate torque values and recheck the seat operation. Repeat step 2 if necessary.

4. Reconnect the battery negative terminal. Turn the ignition key ON. Reset the customer's radio station presets. Set the clock to the correct time.

5. Use the Hi-Scan Pro to erase any diagnostic trouble codes. Disconnect the Hi-Scan Pro and check that the air bag light flashes 6 times then turns off. If the light does not do this, diagnose the system as per TSB 00-90-008.