Fuel Pump Removal and Installation

This article has been updated by techincal service bulletin TSB 06-30-001 dated JANUARY, 2006.

The 2003-2005 Accent Shop Manuals contain incorrect information for the fuel filter location.

VEHICLES AFFECTED:
Model: 2003-2005 Accent
Affected vehicle production date range:
- 3 door model: Produced June 6, 2003 - End of 2005MY
- 4 door model: Produced June 10, 2003 - End of 2005MY

FUEL FILTER AND PUMP REPLACEMENT




1. Reduce the internal pressure of the fuel lines and hoses by completing the following operations.
- After removing the rear seat cushion, disconnect the fuel pump harness.
- Start the engine. Allow it to stop by itself, then turn the ignition switch OFF.
- Disconnect the battery negative (-) terminal.
- Connect the fuel pump harness connector.

2. Remove the eye bolts while holding the fuel filter nuts securely.

CAUTION: Cover the fuel filter with a shop towel to avoid residual gasoline from splashing.






For the 2003-2005MY the fuel filter is incorporated into the fuel pump assembly within the fuel tank.
- Part Number: 31112-25700 (Filter-Fuel Injection Pump).

3. Remove the fuel filter mounting bolts, then remove the fuel filter from the fuel filter clamp.

4. After replacing the fuel filter, check for fuel leaks