Seat Back Cover
SEAT BACK COVER1. Remove the seat.
2. Remove the seat back.
3. Remove the screw, then remove the lumbar support knob (A).
4. Remove the headrest and headrest guide (A).
5. Release the hook (A) and clips (B) then fold back the seat back cover (C).
6. Pull back the edge of the seat-back cover all the way around, then release the clips (B).
7. Remove the seat-back cover.
8. Installation is the reverse of removal.
NOTE:
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the fastener, hook and inside springs.
- With side airbag, replace the clips (A) with new ones using commercially available upholstery ring pliers (B).
