Instrument Facia Panel Removal and Installation

INSTRUMENT FACIA PANEL REMOVAL AND INSTALLATION

NOTE:
- When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Take care not to scratch the dashboard and related parts.

1. Tilt the steering column down.
2. Remove the screws, and detach the clips.
3. Disconnect the following items to remove the instrument facia panel (A).
- Rheostat connector (B).
- TCS switch connector (C).
- Trip computer switch connector (D).
- Clock connector (E).
- Hazard switch connector (F).
- Cigar lighter connector (G).






4. Installation is the reverse of removal.

NOTE: Make sure the connector is plugged in properly.