A/T - Oil Leak From Bell Housing/Torque Converter Area

Group: TRANSAXLE

Number: 06-40-002

Date: FEBRUARY, 2006

Model: ALL

Subject
AUTOMATIC TRANSAXLE OIL LEAK BEHIND TORQUE
CONVERTER

This bulletin supersedes TSB 01-40-021 to include additional models.

DESCRIPTION:





Some transaxles may experience an oil leak in the bellhousing behind the torque converter. If this occurs, the oil leak will be observed at the drain hole on the lower surface of the transaxle.

REPAIR DIAGNOSIS:





If you are servicing a vehicle with an oil leak in the bellhousing area behind the torque converter, refer to the table below to determine the proper repair procedure:

REPAIR PROCEDURE:

1. Remove the transaxle.

2. Remove the torque converter.

3. Use a suitable tool to remove the oil seal.





4. Apply a thin coat of ATF to the lip of the oil seal before installation. Use the special tool (09452-21200) to install the oil seal to the oil pump housing.





PARTS INFORMATION:





WARRANTY INFORMATION: