Rear Seat
REAR SEATRear Seat:
REMOVAL
1. Remove the rear seat cushion mounting bolts (2EA).
2. Remove the rear seat cushion assembly.
3. Remove the rear side seat back after removing the bolt.
4. Remove the lower mounting bolts from the rear seat back.
Tightening torque: 17-26 Nm (170-260 kg.cm, 12-19 lb.ft)
5. Remove the rear seat mounting bolts after folding the rear seat back.
Tightening torque: 17-26 Nm (170-260 kg.cm, 12-19 lb.ft)
6. Remove the rear seat assembly.
7. Installation is the reverse of removal.
NOTE: Before attaching the rear seat back and seat cushion, make sure there are no twists or kinks in the rear seat belts and center belt.