Removal

Removal
1. Drain the power steering fluid.






2. Remove the joint assembly connecting bolt.






3. Using the special tool (09568-31000), disconnect the tie rod end from the knuckle arm.






4. Disconnect the front muffler temporarily.






5. Remove the connecting bolts of front and rear roll stopper.






6. Remove mounting bolts (6EA) of cross member complete assembly.






7. Disconnect the pressure hose and the return tube.
8. Remove the steering gear box mounting brackets and remove the steering gear box assembly together with mounting rubber.

Note: Move the rack completely to the right and then remove the gear box to the left from the crossmember

Caution: When removing the gear box, pull it out carefully and slowly to avoid damaging the boots.






9. Remove the stabilizer bar.