Disassembly

1. Disconnect the M-terminal(A) on the magnet switch assembly(B).




2. After loosening the 2 screws(A), detach the magnet switch assembly (B).




3. Loosen the brush holder mounting screws(A) and through bolts(B).




4. Remove the rear bracket(A) and brush holder assembly(B).




5. Remove the yoke(A) and armature(B).




6. Remove the, lever plate(A) and planet shaft packing(B).




7. Disconnect the planet gear(A).




8. Disconnect the planet shaft assembly(A) and lever(B).




9. Press the stop ring(A) using s socket(B).




10. After removing the stopper(A) using stopper pliers(B).




11. Disconnect the stop ring(A), overrunning clutch(B), internal gear(C) and planet shaft(D).




12. Reassembly is the reverse of disassembly.

NOTE: Using a suitable pulling tool(A), pull the overrunning clutch stopper(B) over the stopper(C).