Engine, Drivetrain - Gray RTV Sealer Update Information
Group: ENGINE MECHANICALNumber: 10-EM-002
Date: MAY 2010
Model: ALL MODELS
Subject
HYUNDAI GRAY RTV SILICONE GASKET MAKER
UPDATED PRODUCT INFORMATION
DESCRIPTION:
This bulletin provides updated product information regarding Hyundai Gray RTV Silicone Gasket Maker and its applicable use.
VEHICLES AFFECTED:
^ ALL MODELS
PARTS INFORMATION:
Hyundai Gray RTV (P/N 00232-19039) is now the replacement service product for previous liquid gasket applications.
NOTE:
^ Does not require a Caulking Gun to apply
^ For use in sealing against oil and coolant leaks
^ Outperforms conventional sealants in critical applications
^ Performs well at low and high temperatures
^ Sensor safe
SERVICE INFORMATION:
1. Prior to applying the RTV Silicone Gasket Maker for reassembly, the following must be done to ensure a properly sealed assembly.
^ Thoroughly remove any old sealing material residue from the mating surfaces with a gasket scraper.
IMPORTANT:
Avoid using any abrasive media such as Scotch~Brite(TM) or ROlOC(TM) disc pads, since the abrasive product remnants can contaminate surrounding internal engine components.
^ Using a degreaser applied to a clean shop towel, wipe off any oil or coolant from the mating surfaces.
^ Apply RTV Silicone Gasket Maker to a dry surface.
2. Refer to the applicable section of the Shop Manual for the sealant BEAD WIDTH specification.
^ Apply a continuous bead of sealant at the specified bead width to prevent oil leakage.
^ The part must be assembled within 5 minutes after the sealant has been dispensed.
3. Refer to the applicable section of the Shop Manual for the TIGHTENING TORQUE specification.
4. After assembly, wait at least 30 minutes before filling with oil or coolant, performing any pressure testing, or engine starting.
WARRANTY INFORMATION:
Normal warranty applies, if applicable.