Key Registration and Correction

KEY REGISTRATION AND CORRECTION




INITIAL REGISTRATION METHOD

REGISTRATION CORRECTION FOR MASTER KEYS
In cases when the master key is lost or where a new set of master keys need to be produced, it can be achieved using two methods.




1. Using ID key




2. Using password
When the customers lost the ID key, new master keys can be registered by using Hi-scan only.
ID key can not be corrected and reproduced.

NOTE: Once the password is mis-registered, it is impossible to register new password during 10 seconds regardless of ignition ON/OFF

When the new master keys have been registered, the codes for existing master keys are all cleared.

The password should consist of 4 numbers among ten (0-9) numbers.