Sunroof / Moonroof: Adjustments
ADJUSTMENTAdjust the difference between the height of the glass panel and the roof panel.
Front side : 2 (+0, -1.0) mm
Rear side : 2 (+1, -0) mm
If the difference is not as specified, adjust using the following procedure.
1. Loosen the nuts holding the glass panel and adjust the gap between the glass panel and roof panel.
Tightening torque: 2 - 4 Nm (20 - 40 kg.cm, 1.5 - 2.9 lb.ft)
2. Loosen the nuts holding the glass panel and adjust the gap between the glass panel and roof panel.
Tightening torque: 4 - 6 Nm (40 - 60 kg.cm, 2.9 - 4.4 lb.ft)