Parking Brake System: Adjustments
SERVICE ADJUSTMENT1. Adjustment procedure of parking brake cable.
Adjust parking brake stroke to be 88 - 98 mm (3.47 - 3.90 inch) by turning the adjusting nut while applying 20 kgf to the brake pedal after full stroke operation of parking brake pedal over 3 time for setting parking cable.
CAUTION:
1. Parking brake adjustment must be carried out after adjusting rear shoe clearance.
2. After adjusting parking brake, notice as followings.
1. Must be free from clearance between the adjusting nut and pin.
2. Check securely that the brake is not dragging.
2. After replacing brake lining, performing Bed-in procedure.
1 Operate parking brake pedal for 10 kgf effort when the vehicle speed is 60 kPh and then drive the vehicle 500 m.
2 Repeat the above procedure twice.
3 Must be held on 30% hill.
3. After assembling, check that all parts move smoothly.
4. Must be free from troubles when the parking brake pedal is operated at 100 kgf.