Rear Axle and Hub
Rear Axle and HubCOMPONENTS:
INSTALLATION
1. Installation is the reverse of removal.
REMOVAL
1. Raise the vehicle and remove the rear wheel & tire assembly.
Tightening torque Nm (kgf-m, lb-ft): 90 - 110 (9 - 11, 65 - 80)
2. Remove the wheel speed sensor bracket bolt (A) and parking brake wire bracket bolt (B).
3. Remove the brake caliper assembly (A) from the carrier assembly and suspend it with wire.
Tightening torque Nm (kgf-m, lb-ft): 65 - 75 (6.5 - 7.5, 47 - 54)
4. Loosen the screw and remove the rear brake disc assembly (A).
5. Loosen the bolts (A) and remove the rear hub & carrier assembly (B) from torsion axle.
Tightening torque Nm (kgf-m, lb-ft): 50 - 60 (5.0 - 6.0, 36 - 43)
