Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2006 >> Azera V6-3.8L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Hi-Scan (Pro) Check

Hi-Scan (Pro) Check

HI-SCAN (PRO) CHECK

1. Turn the ignition switch OFF.
2. Connect the Hi-scan (pro) to the 16P data link connector located the under drivers side kick panel.





3. Turn the ignition switch ON.
4. Check for diagnostic trouble code using the Hi-scan (pro)
5. After completion trouble of the repair or correction of the problem, erase the stored fault codes using the clear key on the Hi-scan (pro).
6. Disconnect the Hi-scan (pro) from the 16P data link connector.
pro multis · About Operation CHARM