Programming and Relearning

PROGRAMMING TRANSMITTER CODE




1. To program the transmitter code, first connect keyless adapter (09900-21300) to DLC(Data Link Connector) cable of hi-scan as shown.




2. After connecting keyless adapter (A) to the multi purpose check connector (10 pins) beside data link connector in driver side crash pad lower panel, turn the power on hi-scan.




3. Select the vehicle model and then do "CODE SAVING".




4. After selecting "CODE SAVING" menu, press the "ENTER" key, then the screen will be shown.




5. After removing the ignition key from key cylinder, push "ENTER" key to proceed to the next mode for code saving.
Follow steps 1 to 3 for code saving procedures.
6. Disconnect keyless adapter (09900-21300) from DLC cable and then proceed to self-diagnosis with DLC cable connected.