Rear Seat Back Cover Replacement

REAR SEAT BACK COVER REPLACEMENT

NOTE:
- Take care not to tear the seams or damage the, seat covers.
- Put on gloves to protect your hands.

1. Remove the rear seat back.
2. Remove the headrest (A) and rear seat lock knob (B).






3. Release the hook strip (A) and fold back the seat back cover (B).






4. Disconnect the headrest guide (A), after raising the rear seat back frame (B).






5. Pull back the edge of the seat-back cover (A) all the way around, and release the clips (B), then remove the seat-back cover.






6. Installation is the reverse of removal.

NOTE:
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the fasteners, hooks and clips.
- Replace the released clips with new ones.