Rear Seat Cushion Cover Replacement

REAR SEAT CUSHION COVER REPLACEMENT

1. Remove the seat cushion.
2. Release all the clips (A) from under the seat cushion, and fold back the seat cushion cover (B).






3. Pull back the edge of the seat cushion cover all the way around, and release the clips (A), then remove the seat cushion cover. On a leather seat cover (B), there are no fasteners.






4. Installation is reverse of removal.

NOTE:
- To prevent wrinkles, make sure the material is stretched evenly over the pad before securing the fasteners and clips.
- Replace the clips with new ones using commercially available upholstery ring pliers (B).