Manual

Description:

DESCRIPTION

1. BLOWER SWITCH
The blower switch controls the blowing level of the air conditioning system by controlling blower motor speed. The switch has an electrical circuit containing a resister that will regulate blower motor input voltage to control the motor speed.

2. MODE SWITCH
The mode switch controls air conditioning system discharge location. The switch contains an electrical circuit to control an actuator that is connected to the mode door for discharge control.

3. TEMPERATURE SWITCH
The temperature switch controls the temperature door position that will be used to regulate the air conditioning system's discharge air temperature. The switch includes a rack & pinion and a cable.

4. INTAKE SWITCH
The intake switch controls the intake door used to regulate the intake air flow of the air conditioning system. The switch contains an electrical circuit used to control the actuator that is connected to the intake door.

5. AIR CONDITIONING SWITCH
The air conditioning switch controls the on/oft position of the air conditioning system compressor. The switch contains an electrical circuit that will switch on/oft the power supply to the relay that is connected to the compressor.

6. REAR DEFOGGER SWITCH
The rear defogger switch is used to defog the rear glass. Switching the switch on, ETACS will output a signal to operate the rear glass heat wire.

NOTE:
1. When Mix or DEF mode is selected with the blower motor on.
- Air conditioning system is switched ON and air intake control is switched to fresh air mode.
- A/C can not be turned OFF
- A/C indicator Will not be turned ON at MIX or DEF mode even through A/C is operating if A/C was not used before selecting MIX or DEF mode.
2. When blower is turned OFF, air intake control is always set to fresh air mode.
However fresh air or recirculation mode can be selected.