Campaign - Cup Holder Rubber Flap Replacement

Group:
TRIM

Number:
05-01-016

Date:
DECEMBER, 2005

Model:
2006 SONATA

Subject:
REPLACEMENT OF FRONT CUP HOLDER RUBBER FLAP (CAMPAIGN T18)

IMPORTANT:
DEALERS MUST PERFORM THIS CAMPAIGN ON ALL AFFECTED VEHICLES PRIOR TO CUSTOMER RETAIL DELIVERY.

DESCRIPTION:

This TSB provides the replacement procedure for the front cup holder rubber flap.

VEHICLES AFFECTED:

Affected vehicle production date range:
^ ASAN plant: Produced from Job # 1 to July 9, 2005 (VIN numbers start "KMHE...")
^ HMMA plant: Produced from Job # 1 to September 15, 2005 (VIN numbers start "5NPE...")





SERVICE KIT CONTENTS

SERVICE PROCEDURE:





1. Open the front cup holder cover.





2. Raise the front cup holder flap and remove the screws (4 each) on the back of flap. Unsnap the two plastic halves.

3. Remove the front cup holder rubber flap and replace it with the new one. Snap the plastic halves together. Use the supplied screws as necessary.





WARRANTY INFORMATION