Tightening Torque

TIGHTENING TORQUE

TIGHTENING TORQUE:

TIGHTENING TORQUE:

Cylinder Head Bolts

Always use new cylinder head bolts.

Cylinder Head Bolts Installation Sequence:

First pass 39.2 Nm (4.0 kgf.m, 28.93 ft. lbs.)
Second pass Tighten 120°
Final pass Tighten 90°

Camshaft bearing cap bolts 9.80 - 11.76 Nm (1.0 - 1.2 kgf.m, 7.23 - 8.68 ft. lbs.)

Crankshaft Main Bearing Cap Bolts

Sequence:

Torque And Quantity:

Always use new main bearing cap bolts.

ALLDATA Editor Note: There are 3 different torque specifications given here, with little additional identifying information, please refer back to the image that shows the main bearing cap Engine Block Disassembly

CVVT & camshaft sprocket bolts 64.68 - 76.44 Nm (6.6 - 7.8 kgf.m, 47.74 - 56.4 ft. lbs.)

Crankshaft damper pulley bolt 284.2 - 303.8 Nm (29.0 - 31.0 kgf.m, 209.76 - 224.22 ft. lbs.)

Intake manifold nuts & bolts 18.62 - 23.52 Nm (1.9 - 2.4 kgf.m, 13.73 - 17.36 ft. lbs.)

Exhaust manifold nuts 39.20 - 44.10 Nm (4.0 - 4.5 kgf.m, 28.93 - 32.55 ft. lbs.)