Wheels - Aluminum Wheel Cap Replacement

ALUMINUM WHEEL CAP REPLACEMENT

MODEL: 2006 SONATA

DESCRIPTION:





The aluminum wheel cap acrylic "H" logo may separate when exposed to elevated temperatures. If this occurs on a vehicle, replace all four wheel caps at the same time.

VEHICLES AFFECTED:

Model: SONATA(NF)

Affected vehicle production date range:

Start of production through October 1st, 2005





PARTS REQUIRED:

REPAIR PROCEDURE:

1. Drill a hole in the wheel cap large enough to insert a screw driver or pick. A 1/4" drill bit is recommended.

CAUTION:
Use care not to damage the wheel or hub under the wheel cap.

WARNING:
Wear eye protection when operating a drill.

2. Insert a screwdriver or pick into the hole and carefully pry the wheel cap from the wheel.

CAUTION:
Use care not to scratch the wheel during cap removal.

WARNING:
Acrylic cap could shatter during removal.





3. Push the new wheel cap into the wheel center until fully seated.





4. Replace the remaining wheel caps








OPERATION CODE AND TIME: