Wheels/Tires - Aluminum Wheel Cap Separation

Group:
CHASSIS

Number:
06-50-005

Date:
MARCH, 2006

Model:
2006 SONATA

Subject:
ALUMINUM WHEEL CAP REPLACEMENT

DESCRIPTION:





The aluminum wheel cap acrylic "H" logo may separate when exposed to elevated temperatures. If this occurs on a vehicle, replace all four wheel caps at the same time.

VEHICLES AFFECTED:
Model: SONATA (NF)

Affected vehicle production date range:
Start of Production through October 1st, 2005





PART REQUIRED

SERVICE PROCEDURE:





1. Drill a hole in the wheel cap large enough to insert a screw driver or pick a 1/4" drill bit is recommended.

CAUTION:
Use care not to damage wheel or hub under wheel cap.

WARNING:
Wear eye protection when operating a drill.





2. Insert a screwdriver or pick into the hole and carefully pry the wheel cap from the wheel.

CAUTION:
Use care not to scratch the wheel during cap removal.

WARNING:
Acrylic cap could shatter during removal.

3. Push the new wheel cap into the wheel center until fully seated.

4. Replace the remaining wheel caps.





OPERATION CODE AND TIME