Installation

REAR LOWER ARM

INSTALLATION
1. Install the lower arm mounting bolts (B) to the cross member (C) with a specified torque.
Tightening torque 110 - 120 Nm (11 - 12 kgf-cm, 79.5 - 86.8 ft. lbs.)





2. Install the spring (A), the lower seat, and the upper pad.
3. Install the lower arm bolt (A) from the rear axle assembly (B) with a specified torque, while supporting with a jack as shown.
Tightening torque 140 - 160 Nm (14 - 16 kgf-cm, 101.2 - 115.7 ft. lbs.)





4. Install the wheel and the tire to the rear hub.
Tightening torque 90 - 110 Nm (9 - 11 kgf-cm, 65.1 - 79.5 ft. lbs.)

CAUTION: Be careful not to damage the hub bolts when installing the rear wheel and tire.