Installation

TRAILING ARM

INSTALLATION
1. Place the trailing arm (D) as shown.





2. Install the trailing arm nuts.

NOTE: Fully tighten the trailing arm mounting nuts with the vehicle on the ground in unloaded condition.

a. Install the trailing arm mounting nut (B).
Tightening torque 140 - 160 Nm (14 - 16 kgf-cm, 101.0 - 115.7 ft. lbs.)
b. Install the trailing arm bracket mounting nut (C).
Tightening torque 140 - 160 Nm (14 - 16 kgf-cm, 101.0 - 115.7 ft. lbs.)
3. Install the wheel speed sensor bracket (A).