Warning Lamp Activation

WARNING LAMP ACTIVATION

CASE 1




When the active fault(including crash) is qualified,10 different faults are recorded or the number of times of same fault is greater than or equal to 10-The warning lamp is turned on for 6 seconds after ignition on and turned off for 1 second and turned on continuously.

CASE 2
When neither active fault nor historic fault exists (below 10 different faults are recorded or the number of times of same fault is less than 10) ("Battery Too Low" fault shall not be applied for this case)




a. The warning lamp is turned on for 6 seconds and is turned off afterwards.




b. (Optional) The warning lamp blinks for 6 seconds at 1 Hz for 6 seconds and be turned off afterwards (when Neither active fault nor historical fault exists)