6. Warranty Information
5. WARRANTY INFORMATIONThe warranty policy is designed to ensure proper diagnosis before performing a repair. This will avoid repeated visits for the same condition.
Parts do not have to be replaced to receive compensation for work using the stand alone GDS OP CODE:
^ 52933RQ0; 0.3 hours - For TPMS Wheel Sensor Diagnostics
IMPORTANT:
Review the TPMS Policy and Procedure below and retain the GDS screen shots as documentation.
TPMS Policy & Procedure
^ It is required that all TPMS claims must list appropriate DTC code(s).
^ Checking tire pressure is not warrantable.
^ It is required that GDS screen prints are included (before and after TPMS replacement) for documentation. These shots are taken from the Set Sensor Status results screen showing TPMS information for all 4 wheel sensors.
^ It is required that a GDS screen print is included that shows the DTC list and VIN number, as seen from the DTC tab.
^ TPMS IDs must be listed in Tech Comments.
^ TPMS module and wheel sensor replacement can NOT be claimed together.
^ Claims with 2 or more wheel sensor replacements are subject to PWA.
^ For diagnosis without parts replacement, use the standalone 52933RQ0 GDS op code. No parts replacement is necessary for this op code.
NOTE:
After diagnosis, any DTC should be cleared before releasing the vehicle.
NOTE:
To ensure that a vehicle has been repaired, it is required to test drive the vehicle a minimum of 25 minutes above 12 MPH to ensure the DTC does not return.