Seat Cushion Cover Replacement

SEAT CUSHION COVER REPLACEMENT

1. Remove the front seat assembly.
2. Remove the scuff band.
3. After disconnecting the protector (B) from the back frame, disconnect the connector (A).






4. Remove the seat cushion(A).






5. After removing the hogring clip (A) on the front of seat cushion, remove the seat cushion cover (C).

CAUTION: When removing the hogring clip, remove the hogring clip while pressing the wire so as not to separate the wire from the sponge.






6. Installation is the reverse of removal.

NOTE:
- To prevent wrinkles, make sure the material is stretched evenly over the cover (A) before securing the hogring clips (B).
- Replace the hogring clips with new ones using special tool (C).