P0700

DTC P0700 TCU REQUEST FOR MIL ON

Component Location:

DTC DESCRIPTION
A P0700 DTC is stored by the Engine Control section of the ECM/PCM to permit MIL illumination and Freeze Frame data storage for automatic transaxle malfunctions. Check the Automatic Transaxle section for additional DTC's if a P0700 is retrieved.

DTC Detecting Condition:

MONITOR SCANTOOL DATA
1. Connect scantool to Data Link Connector (DLC).
2. Warm up the engine to normal operating temperature.
3. Monitor IVT DTC (Diagnostics Trouble Code) on the scantool. Then refer to "Automatic-Transmission's DTC Guide".

VERIFICATION OF VEHICLE REPAIR
After a repair, it is essential to verify that the fault has been corrected.
1. Connect scan tool and select "Diagnostic Trouble Codes (DTCs)" mode.
2. Clear the DTCs and Operate the vehicle within DTC Enable conditions in General information.
3. Are any DTCs present?

YES - Go to the applicable troubleshooting procedure.

NO - System is performing to specification at this time.