Center Facia Panel Replacement

CENTER FASCIA PANEL REPLACEMENT

NOTE:
- When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.

1. Put the SST (09840-1E100) (B) into the space between the center fascia and crash pad.

NOTE: Be care not to damage the center fascia and crash pad.

2. Separate the center fascia panel (A) from the crash pad pulling the SST (09840-1E100) (B) as shown on the photo.

CAUTION: Pull the SST slowly not to damage the center fascia panel.






3. Pull the other side of center fascia panel (A) with the SST (09840-1E100) (B) in the way of "step 2".






4. Disconnect the connector (A), then remove the center facia panel.






5. Installation is the reverse of removal.

NOTE: Make sure the connector is plugged in properly.