Overhaul
DISASSEMBLY1. Remove the push button(A) from the knob sub assembly.
2. Remove the knob sub assembly from the lever subassembly. (Screw: 1 EA)
3. Remove the indicator assembly(A).
4. Remove the detent spring (A). (Bolt: 1 EA)
5. Loosen the bracket sub assembly nut(A).
6. Remove the screw.
7. Disassemble the bracket sub assembly(A) after removing the cotter pin (2EA).
8. Disassemble the hinge shaft from the lever sub assembly.
REASSEMBLY
1. Reassemble the hinge shaft to lever sub assembly.
2. Reassemble the bracket sub assembly
3. Install the detent spring.
4. Install the indicator assembly.
5. Reassemble the knob sub assembly to the lever subassembly
6. Install the push button to the knob sub assembly