Removal and Replacement

MANUAL TRANSAXLE SHIFT CONTROL SYSTEM

COMPONENTS(1):

COMPONENTS(2):

REMOVAL
1. Remove the center console(A).





2. Remove the cup holder(A) and the parking brake cover(B).





3. Remove the center console side cover(A).





4. Remove rear mounting bolt(A) of the center console.





5. Remove front mounting bolt(A) of the center console and remove the center console.





6. Remove the select cable snap pin(A).





7. Remove the shift cable clip(A).





8. Remove the shift cable(A) and select cable(B).
9. Remove the shift lever assembly(C).





10. Remove the retainer(A) and nuts(B).





11. Remove the snap pins(2EA).(Transaxle side).





12. Remove the shift cable and select cable.

INSTALLATION
1. Install the shift cable and select cable after locating the shift lever and select lever at the neutral position.

NOTE: When operating lever of body side, check secure operation of lever of transaxle side after assembly.

2. Install the snap pins(2EA) of transaxle side.





3. Install the shift lever assembly.





4. Install the shift cable and select cable to the shift lever side.

NOTE: Adjust the cable length with select cable adjuster(A) in "N" position before installing the center console.





5. Install the center console.