Notes With Regard to Diagnosis

NOTES WITH REGARD TO DIAGNOSIS

The phenomena listed in the following table are not abnormal.





HI-SCAN (PRO) CHECK

1. Turn the ignition switch OFF.
2. Connect the Hi-scan (pro) to the 16P data link connector located under the driver's side kick panel.





3. Turn the ignition switch ON.
4. Check for diagnostic trouble code using the Hi-scan(pro)
5. After completion trouble of the repair or correction of the problem, erase the stored fault codes using the clear key on the Hi-scan (pro).
6. Disconnect the Hi-scan (pro) from the 16P data link connector.

ABS CHECK SHEET: