Installation
REAR UPPER ARMINSTALLATION
1. Install the rear upper arm mounting bolts(A).
2. Install the rear upper arm ball joint self-locking nut(A) and the split pin(B).
3. After securely supporting the cross member by a jack, Install the four cross member mounting bolts(A).
Tightening torque Nm (kgf-m, lb-ft)
140-160 (14-16, 101.2-115.7)
4. Install the rear shock absorber mounting bolts(A) and the trailing arm(B) to the knuckle.
5. Install the wheel speed sensor bolt(A) and the parking brake cable(B).
6. Install the brake caliper mounting bolts(A).
7. Install the four rear muffler mounting rubbers(A,B) and the connecting bolts(C).
Tightening torque Nm (kgf-m, lb-ft)
40-60 (4-6, 28.9-43.4)
8. Install the wheel and the tire(A) to the rear hub(B).
CAUTION
Be careful not to damage the hub bolts(C) when installing the rear wheel and tire(A).