Wheel Balance
WHEEL BALANCEADJUSTMENT
^ If a tire balance machine has adhesion balance weight mode settings and drive-in weight mode setting. select and adjust a drive-in weight mode suitable for wheels.
1. Set wheel on wheel balancer using the center mark as a guide. Start the tire balance machine.
2. Install balance weight.
CAUTION
^ Do not install the inner balance weight before installing the outer balance weight
^ Before installing the balance weight, be sure to clean the mating surface of the wheel.
a. Install balance weight in the position shown.
b. When installing balance weight to wheels, set it into the grooved area on the inner wall of the wheel as shown so that the balance weight center is aligned with the wheel balancer indication position (angle).
CAUTION
^ Always use genuine Hyundai adhesion balance weights.
^ Balance weights are not reusable; always replace with new ones.
^ Do not install one balance weight sheet on top of another.
3. Start wheel balancer again.
4. Install drive-in balance weight on inner side of road wheel in the wheel balancer indication position (angle).
CAUTION
Do not install more than two balance weights.
