C2372

DTC C2366 TCS VALVE PRIMARY (USV1) ERROR
DTC C2370 TCS VALVE SECONDARY (USV2) ERROR
DTC C2372 ESC VALVE 1 (HSV1) ERROR
DTC C2374 ESC VALVE 2 (HSV2) ERROR

COMPONENT LOCATION
Refer to DTC C1235. C1235

GENERAL DESCRIPTION
Refer to DTC C2308. C2308

DTC DESCRIPTION
Refer to DTC C2308. C2308

DTC DETECTING CONDITION





MONITOR ACTUATION TEST
1. Connect scan tool to Data Link Connector (DLC)
2. Ignition "ON" & Engine "OFF".
3. Select the "Actuation Test" mode on the scan tool.
4. Inspect operating status of inlet valve with Actuation Test.
Specification: It's normal if operating sound is heard.





5. Does a inlet valve operate normally?

YES
>Fault is intermittent caused by inoperative valve or was repaired and HECU memory was not cleared. Go to the applicable troubleshooting procedure.

No
>Go to "W/Harness Inspection" procedure.

TERMINAL AND CONNECTOR INSPECTION
Refer to DTC C2308. C2308

VERIFICATION OF VEHICLE REPAIR
Refer to DTC C2308. C2308