P0717

DTC P0717 INPUT SPEED SENSOR CIRCUIT - NO SIGNAL

COMPONENT LOCATION
Refer to DTC P0716. P0716

GENERAL DESCRIPTION
Refer to DTC P0716. P0716

DTC DESCRIPTION
Refer to DTC P0716. P0716

DTC DETECTING CONDITION





SPECIFICATION
Refer to DTC P0716. P0716

SIGNAL WAVEFORM
Refer to DTC P0716. P0716

MONITOR SCANTOOL DATA
Refer to DTC P0716. P0716

TERMINAL & CONNECTOR INSPECTION
Refer to DTC P0716. P0716

SIGNAL CIRCUIT INSPECTION
Refer to DTC P0716. P0716

POWER SUPPLY CIRCUIT INSPECTION
1. Ignition "ON" & Engine "OFF".
2. Disconnect the "INPUT SPEED SENSOR" connector.
3. Measure voltage between terminal "3" of the INPUT SPEED SENSOR harness connector and chassis ground.





4. Is voltage within specification?

YES

> Go to "Ground circuit inspection" procedure.

NO

> Check for open in harness. Repair as necessary and Go to "Verification of Vehicle Repair" procedure.

GROUND CIRCUIT INSPECTION
Refer to DTC P0716. P0716

COMPONENT INSPECTION
Refer to DTC P0716. P0716

VERIFICATION OF VEHICLE REPAIR
Refer to DTC P0716. P0716