Center Fascia Panel Replacement

CENTER FASCIA PANEL REPLACEMENT

NOTE:
- When prying with a flat-up screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
- Put on gloves to protect your hands.

1. Put the SST (09840-1E100) (A) into the space between the center facia and crash pad.

NOTE: Be care not to damage the center fascia and crash pad.

2. Separate the center facia panel (B) from the crash pad pulling the SST (09840-1E100) (A).

CAUTION: Pull the SST slowly not to damage the center facia panel.






3. Pull the other side of center facia panel (B) with the SST (09840-1E100) (A) in the way of" step2)".






4. After loosening the mounting screws, then remove the center fascia upper tray (A).






5. Installation is the reverse of removal.