Seat Back Frame: Service and Repair

SEAT FRAME REPLACEMENT

1. Remove the following items.
- Recliner cover.
- Seat back panel.
- Headrest guide.
- Seat back cover.

2. After loosening the mounting bolts, then disconnect the seat back frame (A) and seat cushion frame (B).

NOTE:
- Remove the side air bag for replacing side air bag installation seat.
- Be fore service, be fully aware of precautions and service procedure relevant to air bag.






3. Installation is the reverse of removal.

NOTE:
- After installing the OCS, confirm proper system operation: Turn the ignition switch ON, the SRS indicator should be turned on for about six seconds and then go off.
- Telltale lamp will turn on for 4 seconds and be turned off afterward.