Power Window Relay: Testing and Inspection
POWER WINDOW RELAYINSPECTION
1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad lower panel.
3. Remove the junction box.
4. Check for continuity between the terminals.
5. There should be continuity between the No. 2 in the I/P-F and No. 17 terminal in the I/P-B when power and ground are connected to the No. 2 terminal in the I/P-H and No. 17 terminal in the I/P-B.
6. There should be no continuity between the No. 2 terminal in the I/P-F and No. 17 terminal in the I/P-B when power is disconnected.
