Front Door Window Glass: Service and Repair

GLASS REPLACEMENT

1. Remove the door trim.
2. Remove the glass mounting hole plug (A).

NOTE:
- Using the door switch to align the mounting hole with the hole on the door glass.
- If it is impossible, align the hole with hands after removing the motor.
- Take care not to drop to glass and scratch the glass surface.

3. Carefully move the glass (B) until you can see the bolts, then loosen them. Separate the glass from the glass run and carefully pull the glass out through the window slot.






4. Installation is the reverse of removal.

NOTE:
- Roll the glass up down to see if it move freely without binding.
- Adjust the position of the glass as necessary.