Windshield Washer Motor: Service and Repair

FRONT WASHER MOTOR

REMOVAL

CAUTION:
- When servicing the washer pump, be careful not to damage the washer pump seal.
- Do not operate the washer pump before filling the washer reservoir.
Failure to do so could result in premature pump failure.

1. Disconnect the negative (-) battery terminal.
2. Remove the front bumper cover.
3. Remove the washer hose and the washer motor connector (A).






4. Remove the washer reservoir (A) after removing 2 bolts.






INSTALLATION
1. Install the washer reservoir.

NOTE: Before installing the pump motor, check the filter for foreign material or contamination, if necessary, clean the filter into the pump motor.

2. Install the washer motor and connect the washer hose and the motor connector.
3. Install the front bumper cover.