Wiper Motor: Service and Repair
FRONT WIPER MOTORREMOVAL
1. Remove the windshield wiper arm and blade after removing a nut (A).
2. Remove the weather strip and the cowl top cover (A) after removing 4 rivets.
3. Remove the windshield wiper motor and linkage assembly after removing 2 bolts. Disconnect the wiper motor connector (A) from the wiper motor & linkage assembly.
INSTALLATION
1. Install the wiper motor and linkage assembly and then connect the wiper motor connector.
TORQUE : 7 - 11 Nm (0.7 - 1.1 kgf.m, 5.0 - 7.9 lbf.ft)
2. Install the cowl top cover.
3. Install the windshield wiper arm and blade.
TORQUE : 23 - 27 Nm (2.3 - 2.7 kgf.m, 17 - 20 lbf.ft)
INSPECTION
1. Install the wiper arm and blade to the specified position.
2. Set the washer nozzle on the specified spray position.