C1625

DTC C1625 CAN TIME OUT-ESC

COMPONENT LOCATION:

GENERAL DESCRIPTION
The CAN is for sending and receiving the information for TCS (ESC) control, between the HECU and EMS/TCU.

DTC DETECTING CONDITION

DTC DETECTING CONDITION:

TERMINAL & CONNECTOR INSPECTION
Refer to DTC C1101. C1101

SIGNAL CIRCUIT INSPECTION
1. Check for open or short in CAN signal harness between terminal 35 of the HECU harness connector and PCM harness connector.
2. Check for open or short in CAN signal harness between terminal 14 of the HECU harness connector and PCM harness connector.
Is it normal?
YES
- Replace the HECU. Then go to Verification of vehicle Repair procedure.
NO
- Repair or replace harness and connector.

VERIFICATION OF VEHICLE REPAIR
Refer to DTC C1101. C1101