P0713

DTC P0713 FLUID (OIL) TEMPERATURE SENSOR CIRCUIT - HIGH

COMPONENT LOCATION
Refer to DTC P0711. P0711

GENERAL DESCRIPTION
Refer to DTC P0712. P0712

DTC DESCRIPTION
Refer to DTC P0711. P0711

DTC DETECTING CONDITION

DTC DETECTING CONDITION:

SPECIFICATION
Refer to DTC P0711. P0711

SCHEMATIC DIAGRAM
Refer to DTC P0711. P0711

MONITOR SCAN TOOL DATA
Refer to DTC P0711. P0711

TERMINAL & CONNECTOR INSPECTION
Refer to DTC P0711. P0711

SIGNAL CIRCUIT INSPECTION
Refer to DTC P0712. P0712

GROUND CIRCUIT INSPECTION
1. Ignition OFF.
2. Disconnect the TRANSAXLE FLUID TEMPERATURE SENSOR connector.
3. Measure the resistance between terminal 2 of the TRANSMISSION FLUID TEMPERATURE SENSOR harness connector and chassis ground.
Specification: Approximately 0 Ohms

Specification:

4. Is resistance within specifications?
YES > Go to Component inspection procedure.
NO > Check for open in harness. Repair as necessary and Go to Verification of Vehicle Repair procedure.

COMPONENT INSPECTION
Refer to DTC P0712. P0712

VERIFICATION OF VEHICLE REPAIR
Refer to DTC P0711. P0711