Oil Pump: Service and Repair

LUBRICATION SYSTEM

COMPONENT:

REMOVAL
1. Drain engine oil.
2. Remove the drive belt.
3. Turn the crankshaft and align the white groove on the crankshaft pulley with the pointer on the lower cover.
4. Remove the oil pan.
5. Remove the timing chain.





6. Remove balance shaft chain (B) and balance shaft module (A).

INSTALLATION
1. Install balance shaft chain.
2. Confirm the balance shaft module timing mark. Timing marks to be visually aligned with centers of adjacent cast timing notches.





3. Install balance shaft module that the timing mark of balance shaft module sprocket should be matched with the timing mark (color link) of balance shaft chain.
Tightening torque 16.66 Nm (1.7 kgf.m, 12.3 ft. lbs.) + 60°+ 60°
4. Install timing chain.
5. Install oil pan.
6. Fill with engine oil.
7. Start engine and check for leaks.