Exhaust Manifold: Service and Repair
EXHAUST MANIFOLDEXHAUST MANIFOLD:
REMOVAL
1. Remove the oxygen sensor connector.
2. Remove the front muffler.
3. Remove the heat protector (A).
4. Remove exhaust manifold stay bolt.
5. Remove exhaust manifold (A) and gasket.
INSTALLATION
1. Install new gasket and exhaust manifold.
Tightening torque 39.2 - 44.1 Nm (4.0 - 4.5 kgf.m, 28.92 - 32.53 ft. lbs.)
2. Install exhaust manifold stay bolt.
Tightening torque 51.94 - 57.82 Nm (5.4 - 5.9 kgf.m, 38.3 - 42.6 ft. lbs.)
3. Install heat protector.
Tightening torque 18.6 - 27.44 Nm (1.9 - 2.8 kgf.m, 13.7 - 20.2 ft. lbs.)
4. Install front muffler.
Tightening torque 39.2 - 58.8 Nm (4.0 - 6.0 kgf.m, 28.92 - 43.37 ft. lbs.)
5. Connect oxygen sensor connector.