Clutch Pedal and Ignition Lock Switch
CLUTCH PEDAL AND IGNITION LOCK SWITCHNOTE: Inspect ignition lock switch. Remove the driver's seat mat to adjust a clutch pedal. No gap between a clutch master cylinder piston and push rod can cause clutch slip.
1. Loosen and draw out the bolt until it is off the pedal surface.
2. Push and pull a clutch master cylinder push rod to satisfy the specification.
Specification:
Clutch pedal stroke - 145 mm (5.7087 inch)
Clutch pedal free play - 13 mm (0.5118 inch)
Clutch pedal distance - 234.7 mm (9.2401 inch)
3. With no pressure on a clutch pedal, tighten the bolt until it contacts on the pedal.
4. Fix the bolt with nut.
5. Press the clutch pedal to the seat ground.
6. Adjust the ignition lock switch position with the pedal a little (3-5 mm)raised.
7. Install the ignition lock switch firmly.
TORQUE: 7.8 - 9.8 Nm (80 - 100 kgf-cm, 5.8 - 7.2 ft. lbs.)