Initial Inspection and Diagnostic Overview

TROUBLE DIAGNOSTICS WHEN USING DIAGNOSIS TOOL

1. The body control module can diagnose by using the diagnosis tool more quickly.
The BCM communicates with the diagnosis tool and then reads the input/output value and drives the actuator.




2. To diagnose the BCM function, select the menu of model and body control module.







3. To consult the present input/out value of BCM, "02. INPUT/OUTPUT MONITORING". It provides information of BCM input/output conditions of power supply, turn signal/brake lamp, headlamp, door, locks, outside mirror, wiper, auto-light and transmitters etc.




4. To perform compulsory operation on BCM input factors, select "03. ACTUATION TEST"

USER OPTION MODE
The BCM ofters 3 items user option mode for a user convenience (Auto door lock, door key burglar alarm, door lock state inform horn)
- It is able to set up the enable or disable of AUTO DOOR LOCK function or AUTO DOOR LOCK operation vehicle speed when using it.
- It is able to set up the enable or disable of enter the burglar alarm mode when using door lock by the key.
- It is able to set up the enable or disable of horn inform function when using door lock by the key or RKE.

1. Select option "SONATA(NF)" and press ENTER.




2. Select option "BODY CONTROL MODULE" and press ENTER.




3. Select option "USER OPTION" and press ENTER.
4. Select option "AUTO DOOR LOCK STATUS by using the direction button(up/down).




5. Select the parameter by using the direction button(left/right) and press ENTER to save it.
(Disable / 5km/h / 10km/h / 15km/h / 20km/h / 25km/h / 30km/h / 35km/h / 40km/h)

6. Select option "ARM/DISARM BY KEY(+RKE)" by using the direction button(up/down).
7. Select the parameter by using the direction button(left/right) and press ENTER to save it.
(Disable / Enable).