Operation CHARM: Car repair manuals for everyone.

Suspension: Service and Repair

REAR ASSIST ARM

COMPONENTS:





REMOVAL
1. Loosen the wheel nuts slightly.
Raise the rear of the vehicle, and make sure it is securely supported.
2. Remove the rear wheel and tire from rear hub.

CAUTION: Be careful not to damage the hub bolts when removing the rear wheel and tire.

3. Remove the assist arm mounting bolt (A) from the rear axle assembly (C).





4. Remove the assist arm mounting bolt (B) from the cross member (D).

INSPECTION
1. Check the bushing for wear and deterioration.
2. Check the assist arm for bending or breakage.
3. Check all the bolts for damage.

INSTALLATION
1. Install the assist arm mounting bolt (B) to the cross member (D).
Tightening torque Nm (kgf.m, lb-ft) 110 - 120 (11 - 12, 79.5 - 86.8)





2. Install the assist arm mounting bolt (A) from the rear axle assembly (C).
Tightening torque Nm (kgf-m, lb-ft) 140-160 (14-16, 101.2-115.7)
3. Install the wheel and the tire to the rear hub.
Tightening torque Nm (kgf-m, lb-ft) 90 - 110 (9 - 11, 65.1 - 79.5)

CAUTION: Be careful not to damage the hub bolts when installing the rear wheel and tire.